Pergo floors have become increasingly popular over the past few years due to their stylish designs and long-lasting durability. But before you can enjoy the beauty of your new floor, you have to install it. Installing Pergo floors is a relatively simple process, as long as you are prepared and have the right tools and materials. Here’s a step-by-step guide to help you get started.
1. Prepare the Room
Before you begin laying your Pergo floors, it is important to make sure the room is properly prepared. This means removing existing flooring and making sure the subfloor is clean, flat, and free of any debris. You should also ensure the room has adequate ventilation and humidity levels. Once the room is prepped, you can begin laying the planks.
2. Measure the Room
Once the room is prepped, you need to measure the space so you know how much flooring to purchase. Measure the length and width of the room and then add 10 percent extra to account for any wastage. This will ensure you have enough flooring for the entire room.
3. Purchase the Flooring
Once you have measured the room and calculated the amount of flooring you need, you can purchase the Pergo planks. You should purchase the same amount of planks for the entire room to make sure the color and pattern of the flooring is consistent. It is also important to read the manufacturer’s instructions, as each product may have specific requirements.
4. Layout the Planks
Before you start laying the planks, it is a good idea to lay them out in the room to get a feel for how they will fit. This will also give you a chance to adjust the planks to get the best look for the space. You should also make sure to leave a gap of at least ¼ inch between the planks and the wall.
5. Secure the Planks
Once the planks are laid out, it’s time to start securing them in place. You can use a hammer and nails or glue to do this. If you are using nails, make sure to use the correct type and size for your flooring. If you are using glue, make sure to follow the manufacturer’s instructions.
6. Trim the Planks
Once the planks are secured in place, you can trim them to fit the edges of the room. You can use a jigsaw or a circular saw to cut the planks. Make sure to wear protective gear such as goggles and gloves when using power tools.
7. Install Transitions
Once the planks are cut to size, you can install transitions. Transitions are strips of wood or metal that are used to bridge the gap between two different types of flooring. For example, if you have tile in one room and Pergo in another, you would need to install a transition between the two.
8. Install the Underlayment
Before you lay the Pergo planks, you should install an underlayment. This is a layer of foam or cushioning that helps to absorb sound and protect the flooring from moisture. Make sure to use the correct type of underlayment for your flooring, as it can vary based on the manufacturer.
9. Install the Final Planks
Once the underlayment is in place, you can start laying the final planks. Make sure to follow the manufacturer’s instructions when installing the planks. It is also important to leave a gap of at least ¼ inch between the planks and the wall.
10. Apply the Finish
Once all of the planks are installed, you can apply the finish. This is a protective layer that will help keep the planks looking new. You can purchase a finish specifically designed for Pergo floors, or you can use a generic sealant. Make sure to follow the manufacturer’s instructions when applying the finish.
Conclusion
Installing Pergo floors is a relatively simple process as long as you are prepared and have the right tools and materials. It’s important to measure the room and purchase the correct amount of flooring, and to make sure the room is properly prepped before you begin laying the planks. Finally, make sure to apply the finish once all of the planks are installed to keep your floor looking new for years to come.