When it comes to piercings, the nose piercing is one of the most popular options. Nose piercings can be done in many different ways, but the hoop nose ring is one of the most common. The hoop nose ring consists of a small hoop that goes through the nose, and a small bead on the end. It is usually made of either gold or stainless steel. Here is a guide on how to put on a hoop nose ring.
Choose the Right Size
The first step in putting on a hoop nose ring is to make sure you choose the right size. The size of your hoop nose ring will depend on the size of your nose. It is important to measure the diameter of your nose before you purchase a hoop nose ring. You can do this by using a measuring tape or a ruler. You should also make sure that the hoop is not too tight or too loose when you put it in your nose.
Clean Your Nose
Once you have chosen the right size, you should make sure that your nose is clean before you put on the hoop nose ring. You can clean your nose with an antiseptic soap and warm water. Make sure that you rinse your nose thoroughly and pat it dry before inserting the hoop nose ring.
Insert the Hoop
Now that your nose is clean, you are ready to insert the hoop nose ring. Take the hoop nose ring and place the smaller end through the hole in your nose. Make sure that the bead is facing outwards, as this will help to keep the hoop in place. You may have to use a bit of force to get the hoop through the hole, but make sure that you do not pull too hard. Once the hoop is in place, you can then secure the bead in place.
Secure the Bead
Once the hoop is in place, you can then secure the bead in place. To do this, you should use a pair of pliers or tweezers to hold the bead in place while you twist the hoop. You should twist the hoop until the bead is firmly secured. Once the bead is secure, you should then check to make sure that the hoop is not too tight or too loose.
Take Care of Your Piercing
Once your hoop nose ring is in place, you should make sure to take care of it. Make sure to keep the area around the piercing clean and dry, and avoid touching it with your hands. You should also avoid using any harsh chemicals or products near the piercing. If you are experiencing any pain or discomfort, make sure to contact your doctor or piercer.
Change Your Piercing Regularly
It is important to remember to change your hoop nose ring regularly. You should change your hoop nose ring at least once every three months. This will help to keep your piercing clean and free from infection. Make sure to use new jewelry each time you replace your hoop nose ring.
Remove Your Piercing Carefully
When you are ready to remove your hoop nose ring, it is important to be careful. Make sure to use a pair of tweezers or pliers to hold the bead in place while you twist the hoop. Once the hoop is loosened, you can then gently remove it from your nose. Make sure to clean the area afterwards to avoid infection.
Conclusion
Putting on a hoop nose ring is not difficult, but it is important to make sure you do it properly. Make sure to choose the right size and clean your nose before inserting the hoop. You should also make sure to secure the bead in place and take care of your piercing. Finally, remember to change your piercing regularly and remove it carefully.
