Adjusting C1 and C2 on your own is not as difficult as it may seem. With a few simple tools and instructions, you can easily make these adjustments yourself and save money in the process. Here are the steps you should take to adjust C1 and C2 yourself.
Step 1: Gather Tools and Materials
Before you begin, you will need to gather the necessary tools and materials. You will need a flathead screwdriver, a crescent wrench, a pair of pliers, and a tube of grease. You may also need some lubricant, depending on the type of adjustment you are making.
Step 2: Identify C1 and C2
Once you have all of the necessary tools and materials, you need to identify C1 and C2. C1 and C2 are usually located on the underside of the vehicle, near the front wheels. C1 is usually a large bolt, while C2 is usually a smaller bolt. It is important to identify the correct bolts before making any adjustments.
Step 3: Remove the Nuts and Bolts
Once you have identified C1 and C2, you need to remove the nuts and bolts. This can be done with a flathead screwdriver and a crescent wrench. You may need to use a pair of pliers to loosen any stubborn bolts. Be sure to use caution when removing the nuts and bolts, as they may be under tension.
Step 4: Adjust the Nuts and Bolts
Once the nuts and bolts have been removed, you can begin adjusting C1 and C2. Depending on the type of adjustment you are making, you may need to adjust the tension on the bolts or the length of the bolts. If you are unsure of how to adjust the bolts, it is best to consult a professional.
Step 5: Reassemble the Nuts and Bolts
Once you have adjusted the nuts and bolts, you need to reassemble them. This can be done by carefully placing the nuts and bolts back in position and tightening them with the flathead screwdriver and a crescent wrench. Be sure to not overtighten the bolts, as this can cause damage to the vehicle.
Step 6: Add Lubricant and Grease
After the nuts and bolts have been reassembled, you need to add lubricant and grease to the threads of the bolts. This will help prevent any corrosion and keep the bolts in good condition. Use a tube of grease and apply it liberally to the threads of the bolts.
Step 7: Test the Adjustment
Once the lubricant and grease have been applied, it is time to test the adjustment. Start the vehicle and test the adjustment. If everything is working properly, you can consider the adjustment successful. If not, you may need to make further adjustments.
Conclusion
Adjusting C1 and C2 can be done on your own with a few simple tools and instructions. Be sure to gather all of the necessary tools and materials before beginning, and be sure to test the adjustment before driving the vehicle. With a little patience and effort, you can adjust C1 and C2 yourself and save money in the process.